background image

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

WARNING
Do not place your BT Diverse 7410 
Plus in the bathroom or other humid 
areas.

Handset range
The BT Diverse 7410 Plus has a range 
of up to 300 metres outdoors when 
there is a clear line of sight between 
the base and handset. Any obstruction 
between the base and handset will 
reduce the range significantly. With 
the base indoors and handset either 
indoors or outdoors, the range will 
normally be up to 50 metres. 
Thick stone walls can severely  
affect the range.

Signal strength
The

   

icon on your handset indicates 

when you are in range. If moving 
out of range of the base, the range 
indicator will flash. If you go out of 
range, any call you are on will be lost.

IMPORTANT
The base station must be plugged 
into the power socket at all times. 
Do not connect the telephone line to 
the telephone wall socket until the 
handset is fully charged. Only use the 
power and telephone cables supplied 
with the product.

Battery low warning
If the

   

icon flashes in the handset 

display you will need to recharge the 
handset before you can use it again. 
You also hear a low battery warning 
beep once every 60 seconds.  
During charging, the 

 

icon will 

scroll in the display as shown on  
page 9.

Getting started 

Location

Place your BT Diverse 7410 Plus within 2 metres of the power 
socket and telephone socket so that the cables will reach.  
Make sure it is at least 1 metre away from other electrical 
appliances to avoid interference.

Your BT Diverse 7410 Plus works by sending radio signals between 
the handset and base. The strength of the signal depends on 
where you site the base. Putting it as high as possible ensures  
the best signal.

Setting up

1

.  Plug the power cable into the socket marked   on the 

underside of the base and plug the other end into the  
power wall socket and switch the power on. You can place 
the cable behind the retaining clip to prevent the plug being 
accidentally pulled from the socket.

2

.  Batteries will come inserted in the battery compartment. 

Remove the protective film from the handset screen and 
activate the batteries by pulling the plastic tab away from 
the back of the handset.

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 24 hours before use.

Summary of Contents for Diverse 7410 Plus























































Reviews: