Instruments
© BT Industries AB 180424-040
21
Swing lock indicator lamp
(SAS models)
When the ignition switch is turned on, this lamp should come on.
After the engine has started up, the SAS warning lamp should
go out. Then, the SAS swing lock cylinder may be deemed oper-
ating normally. This tells the operator that the vehicle is sup-
ported with four front and rear wheels, with swing lock cylinder
locked by the SAS feature.
This lamp will go out when the swing lock cylinder is unlocked.
Speed control warning lamp
(Option)
This lamp will come on, thereby informing the operator that the
speed controller is abnormal.
CAUTION!
Once the warning lamp has come on during the operation, dis-
continue the operation in progress and park the vehicle at a
safe location. Then, ask a BT dealer for an inspection.
Torque converter oil temperature gauge
(Option)
Indicates the torque converter oil temperature.
1.
Operates when the ignition switch is on.
2.
Indicates the green zone if the oil temperature is normal dur-
ing operation.
3.
If, during operation, the gauge indicates the red zone,
please stop the operation, inspect the oil level, and add oil if
insufficient. (See the torque converter oil inspection section
for the methods for inspection and addition.)
4.
If the gauge indicates the red zone white the torque con-
verter oil level is proper, ask a BT dealer for inspection.
