BSVILLAGE Hayward Micro, Installation Instructions Manual, Page: 46 / 237

16
6.3 Operating range
Use the heat pump within the following ranges of temperature and humidity to
ensure safe and effective operation.
Heating mode
Outside temperature +10°C – +40°C
Water temperature +15°C – +40°C
Relative humidity < 80%
Setting range for the set point +15°C – +40°C
If the temperature or humidity does not correspond to these conditions,
safety measures may be activated and the heat pump may no longer work.
Below 10°C, the heat pump will stop functioning. When the operating limit is
reached, the message “tP” appears on the control panel.
6. OPERATION (continued)