Test
2016-03-10 / DIS 184_58300000140186_ara_en_k
Copyright by BSH Hausgeräte GmbH
Page 61 of 181
5.2
Checking the alignment of the panel with the
door
Replacement of parts or appliances may only take place if the
permissible tolerances are
not
adhered to!
5.2.1
Checking protrusion/depression of the door relative to
the panel
Tolerances:
•
Protrusion of the door relative to the panel ≤ 2 mm
•
Depression of the door relative to the panel ≤ 1 mm
1. Measure the protrusion/depression.
2. Compare the measurement result with the permissible tolerances.
5.2.2
Checking the lateral displacement of the panel relative
to the door's decorative strips
Tolerances:
•
Left/right ≤ ± 1 mm
1. Measure the lateral displacement.
2. Compare the measurement result with the permissible tolerance.
5.2.3
Checking the tilt of the panel relative to the door's
decorative strips
Tolerance:
•
Left(1)-right(2)/right(2)-left(1) ≤ ± 1 mm
1. Measure the tilt.