TECHNICAL SERVICE BULLETIN
Convection Microwave/Trim Mounting Kit (681679)
This Convection Microwave/Trim Mounting Kit has been designed to improve the way in which the convection
microwave is secured to the trim kit base. The kit is available for the following SKUs:
BA268811 HMT8020 HMT8050 HMT8060 HMT8720
HMT8750 HMT8760 HZ25C530 MCT27EB MCT27ES
MCT30EB MCT30ES
Parts included
Anti-tip tabs
Rear brackets
Base assembly
Exhaust guide
Latches
Base supports
#8-18 Screws
½” Drywall screws
Self-tapping bolts
Follow the instructions below to uninstall the original trim kit parts and install the parts included in the service kit.
Uninstall the Original Trim Kit Parts
1
Remove trim kit frame.
2
Slide microwave forward until power cord and receptacle
can be reached.
3
Unplug power cord.
4
Remove 2 screws from base assembly, then remove and
discard base.
