24
ADVANCED WI--FI
SETTINGS
The Housewise Thermostat provides you the most features and energy savings when connected to your personal web portal. Your thermostat
supports Wi--Fi 802.11 b/g/n. Wi--Fi is normally configured during initial setup. You may, however, need to reconfigure the settings if your
Wi--Fi network settings change.
On Thermostat:
Touch Menu > Settings > Wi--Fi
Manual Configuration
The list of available networks appears in the Network menu. If your network doesn’t appear, you can enter the SSID manually by touching
Manually configure Wi-Fi from the bottom of the list.
After selecting or entering the SSID, you can configure the following parameters:
S
Connect to IP using:
Select DHCP to automatically connect, select Static IP to type in your own values (if unsure, leave DHCP Enabled).
S
SSID Encryption:
Your thermostat supports WEP, WEP128, WPA, and WPA2 encryption schemes.
S
Password
(if encryption is used)
S
Channel:
Leave any channel selected unless your network is configured to use a specific Wi--Fi channel.
Advanced Settings
If you are using Static IP addressing, the following additional parameters will require configuration:
S
IP Address
S
Gateway
S
Subnet Mask
S
Primary and Secondary DNS
If you need to specify your thermostat’s MAC address in your router’s configuration, you can obtain it from Menu > Settings > Wi--Fi >
Diagnostics > Wi--Fi Details
Diagnostics
Your thermostat contains extensive diagnostic tools to help troubleshoot issues:
S
Wi--Fi Details:
Displays key network details as well as router and server connection status.
S
View Log:
Displays log file information about Wi--Fi operation.
S
Ping Gateway:
Checks to see if the network gateway is responding.
S
Ping Bryant.com:
Checks to see if the Bryant servers are responding.
S
Ping Address:
Checks to see if the entered IP address is responding.
On Thermostat:
1. Touch Menu > Settings > Wi--Fi > Diagnostics
2. Select the tool you wish to use.
