27
Temp Correction
Lets you program an offset between the real temperature at thermostat
and the displayed temperature. If you find that the temperature where the
thermostat is located does not represent the room temperature, change the
offset to compensate for the difference. The correct temperature is
adjustable from +/-- 10
°
F in 0.5
°
F (0.3
°
C) increments.
Installer Code
To prevent accidental modifications to the installation settings, you can
enable a 4--digit installer code. This code is pre--programmed to 3262.
Test Equipment
These options let you test the wiring and connections of the devices
connected to the thermostat by turning them on or off.
The equipment will turn off when you exit the menu.
EQUIPMENT DAMAGE HAZARD
Failure to follow this warning could result in equipment
damage.
Compressor protection and minimum run--time features are not
enforced while in this mode.
!
WARNING
To test the equipment:
From the Home screen, press
MENU
.
Select
Settings
"
Installation Settings
.
Select
Test Equipment
.
Select
OK
.
Test the equipment connected to the thermostat by turning each
component on and off.
