10
Exposed to direct light or heat from a lamp, sun, fireplace, or other
temperature
−
radiating objects which could cause a false reading.
Close to or in direct airflow from supply registers and return
−
air regis-
ters.
In areas with poor air circulation, such as behind a door or in an al-
cove.
Installer should determine whether control will be installed as single
−
piece or
two
−
piece. In single
−
piece configuration, as many as 14 wires may need to run
to wall mounting location for connection to the control. In two
−
piece
configuration, the Display Module and Equipment Control Module are
connected by two wires.
Install Thermidistat Control
ELECTRICAL OPERATION HAZARD
Failure to follow this warning could result in personal injury
or death.
Before installing Thermidistat Control, turn off all power to
equipment. There may be more than 1 power disconnect.
!
WARNING
