background image

Furniture Use and Maintenance

EN

 

§

Furniture Assembly

Explanations

 

/

 

Possible

 

notes

 

used

 

in

 

the

 

Assembly

 

Instructions:

§1

§2

§3

1.

2.

4.

5.

6.

7.

1. Furniture units must be placed on a level surface and levelled.

2.

Check the condition of the cam pins while the furniture is in use. Tighten if necessary.

4.

Furniture must be placed in dry rooms, with working ventilation, and at least 1 m from active heat sources. The rooms must be protected against

detrimental weather conditions (sunlight, rain, etc.).

6.

Furniture must be moved by being lifted it with no load on it. Note: shifting or dragging furniture may cause permanent damage. When moving,

hold the vertical elements of the unit, i.e. the sides and legs. Do not grab the horizontal elements, e.g. structural shelves or drawers, as these are
prone to damage.

7.

Clean furniture using a damp cloth or paper towel.

3. NOTE!! Do not climb on furniture.

5.NOTE!! Placing excessive loads on furniture is dangerous to users and may cause permanent damage.

§5

§6

§7

§8

§9

§4

Drill holes according to drawings. During this operation take
special care not to cut yourself or damage the component!

§10

§11

§12

§13

§14

§15

§18

§17

NOTE!!

Component symbol

Code

Pack

A

B

C

D

E

Dimensions [mm]

Quantity[pcs]

NOTE!!

NOTE!!

The first stage of the assembly involves fitting the components with

t

he proper accessories as specified on the drawings below. 

The  symbol

denotes places where special caution is required 

 during assembly.

 

NOTE!! L ack

 

o

 

for

 

improper

 

adjustment

 

poses

 

risk

 

of

 

flap

 

door

falling

 

freely.

Attach

 

unit

 

to

 

wall

 

when

 

completely

 

assembled.

 

Improperly

attached

 

furniture

 

may

 

break

 

free

 

and

 

fall

 

while

 

being

 

mounted

or

 

used.The

 

unit

 

may

 

only

 

be

 

attached

 

to

 

the

 

wall

 

by

 

a

 

qualified

person.

 

Check

 

that

 

the

 

wall

 

is

 

suitable

 

fo

 

rhaving

 

furniture

attached

 

to

 

it

 

before

 

hand.

 

Choose

 

a

 

suitable

 

anchor

 

bolt

 

and

check

 

the

 

strength

 

and

 

quality

 

of

 

the

 

attachment.

Place

 

the

 

top

 

unit

 

on

 

the

 

base

 

unit

 

then

 

join

 

them

 

using

connector

 

plate

 

n52

 

and

 

screws

 

p25.

 

The

 

unit

 

may

 

b

r

eak

 

free

and

 

fall

 

during

 

use

 

if

 

this

 

instruction

 

is

 

not

 

followed.

Assemble the unit according to the drawings below using the 
specified connectors and/or joints. 

ATTENTION!

 The operation must be carried out very carefully 

in order to damage the parts of the product.

      

Apply glue y1 into the holes of the depicted component, attach it and

wait for the glue to dry. 

Clean the glued area thoroughly. 

Adjustment

Tighten the screws e8 so they do not project over the rim. 

Option

P

lace the insert upside down onto the frame in place designed for

that component using the unfolded top unit. 

Use security tape as this is essential to ensure the safety of
those who use your furniture.

NOTE!! 

Handle glass components with extra caution so as not to cut

yourself or damage or break the components.

Connect the adjoining units using VHS connecting screws. 

§19

The door may be installed either on the left or the right side of the 

unit.

§20

NOTE!! B ed unit and flap have a tendency to slam when
closing. There is a risk of injury.

§21

Apply masking strip/unit in visible places.

§22

2

A

B

A=B

4

f1

3

6

1

3.

5

n26

1

p38



x16 mm

§23

NOTE!! 

High gloss fronts are covered with a protective film which 

is to be removed once the component has been hung up. 
The surface of these fronts cannot be cleaned until least 4 weeks
after removing the protective film. 

NOTE!! 

Furniture may break free and fall if not used with caution. 

Note: Before starting to assemble furniture, please read all the Furniture Assembly Instructions including the rules for maintenance and use. 
  Follow the sequence of individual assembly stages according to the paragraphs              provided in the General Rules for Furniture Assembly. 

KEEP THESE INSTRUCTIONS FOR THE DURATION OF FURNITURE USE. 

1. 

NOTE!

 Do not proceed with assembly if any components are defective or damaged. 

2. Place the components on a soft, clean surface, e.g. a towel or blanket, during assembly. Do not assemble furniture on rags, carpets, etc. 
3. Drive the dowel pins f1 into the 8mm diameter holes, located on components' edges. Leave the cam bolt holes free. Any pin that sticks out by more 

 than 10mm needs to be taken out, replaced and shortened as it may damage the side wall during assembly. 

4. Make sure that the diagonals are of equal length before attaching the back wall. 

 5. 

NOTE!

 Safety strap. Install according to instructions. Improperly secured furniture may break free and fall during use. 

6. Dear Customer, in case of complaints please quote the code number provided on the first page of the Assembly Instructions. Report all comments 

   and complaints where you purchased the furniture. If possible, provide a label of defective product indicating the packing date and the packer. 

Set screw   adjusts cabinet flap door opening (tighten the screw for

 

the 

cabinet flap door to fall more freely).      

Elements of accessories, designed for self-purchase in 

specialized stores.

Reviews: