Brunton 66Spectra, Instructions

Page: 1 / 1

66SPECTRA 66SPECTRA 66SPECTRA 66SPECTRA 66SPECTRA
TM TM TM TM TM
& 6JET & 6JET & 6JET & 6JET & 6JET-L/R -L/R -L/R -L/R -L/R
TM TM TM TM TM
Ins Ins Ins Ins Instr tr tr tr tructions uctions uctions uctions uctions
Orienteering Compasses
1) Place the 66SPECTRA onyour right or left hand ( figure 1 ).
2) Fold the map so the magneitc meridian lines are parallel with the edge of the
printed map.
* The starting position and destination should be visible.
3) Using your SPECTRA hand, hold the map with your thumb parallel to the desired
direction of travel ( figure 1 ).
* Use your thumb as a baseplate.
4) Orient the map by rotating your body until the magnetic needle is parallel with the
magnetic meridian lines.
5) Read the color and symbol the NORTH end of the needle points, e.g. “
blue
--
two dot ”.
* Remeber the color and symbol as you run to your destination.
Tips!
a. Make a habit of checking your direction and position on the map.
b. Draw a fine arrow, using a pen, permanent marker, or finger nail varnish on top of
your thumb. This allows you to point the arrow in the intended direction of travel,
and makes position location more accurate.
66SPECTRA Instructions
Printed in U.S.A.
form 18-Spectra/Jet rev. 0151
6JET-R/L Instructions
Figure 1
1) Place the 6JET on your hand ( figure 2 ).
2) Fold the map so the magneitc meridian lines are parallel with the edge of the
printed map.
* The starting position and destination should be visible.
3) Using your 6JET hand, hold the map with the black, direction of travel arrow
pointing in the desired direction of travel ( figure 2 ).
4) Orient the map by rotating your body until the magnetic needle is parallel with the
magnetic meridian lines.
5) Run to your destination.
Tips!
a. Make a habit of checking your direction and position on the map.
b. As you check your location on the map, move your compass forward during your
run. This will help you estimate the distance and amount of time until you reach
your destination.
Specifications
66SPECTRA
TM
Size:
1.88” diamter x 0.63” (48 mm diamter x 16 mm)
Weight:
1.5 oz. (43 g)
Bearing: Saphire
Scales:
None
6JET
TM
-R/L
Size:
3.75” x 2.88” x 0.5” (95 x 73 x 13 mm)
Weight:
1.5 oz. (43 g)
Bearing: Saphire
Scales:
cm/mm & 1:15,000
BRUNTON
620 E. MONROE
RIVERTON, WY 82501
(307) 856-6559
SUPPORT@BRUNTON.COM
WWW.BRUNTON.COM
Figure 2