©Bruno Independent Living Aids, Inc.
®
SRE-3000 OPERATOR 12 JUNE 2017
5
SAFETY
FOR YOUR SAFETY
• Read and understand the operating instructions, and all safety precautions prior to
using the SRE-3000.
• Be sure stairs are clear of objects before operating the stairlift.
• Always be aware of the surface onto which you are stepping as you get on and off the
stairlift.
• Avoid carrying items with you on the stairlift which could hinder movement of the
stairlift up and down the stairs.
• Do not wear LOOSE clothing that could interfere with stairlift movement.
• Fasten your positioning belt before operating the stairlift.
• Make sure the seat is locked in the correct riding position.
• Be sure that the seat swivel path is clear before swiveling in or out of the ride position,
and before repositioning the seat.
• Be certain the seat swivel is locked in place before attempting to get on or off the
stairlift.
• Make certain that there are no obstacles that would prevent complete raising/lowering
of the optional power footrest (if unit is so equipped).
• NON-AMBULATORY USERS: Bruno recommends carrying a cellular or cordless
telephone or an emergency communication device when riding the stairlift while alone
in the house.
Each stairlift is designed to travel down the stairway at a slightly slower speed than is
the case when travelling UP.
The footrest is equipped with
obstruction sensors
which stop the carriage if an obstacle
is encountered on the stairs.
If this should occur, press the opposite side of the UP/DOWN rocker control switch (on
the armrest) to run the carriage in the opposite direction. Clear the obstacle from the
stairway or rail then resume travel in the desired direction.
Your SRE-3000 is battery powered and will continue to operate for some time during a
power outage. The length of operation will depend on the battery condition, the length of
the stairs and the weight of the rider.
Only in the event of a prolonged power outage (more than one hour) will it be necessary
to turn the power off (circuit breaker switch on the carriage) and turn off or unplug the
charger from the wall outlet to conserve battery charge.
The power swivel seat option is equipped with current overload sensing to prevent
further seat swivel if a jam is detected.
The power footrest option is equipped with current overload sensing that will cause
the footrest to return to its last position if a jam is detected.
The power folding rail option is equipped with current overload sensing to prevent
damage if an obstruction or jam is detected.
Summary of Contents for SRE-3000 Elan
Page 38: ......
