Bruker SampleXpress User Manual Download Page 51

Page: 51 / 174

Z31900_00_01

Transport, Packaging and
Storage

Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by employees of the manufacturer or persons authorised
by the manufacturer.

6.1

Symbols on the Packaging

The following symbols are affixed to the packaging material. Always observe the sym-
bols during transport and handling.

Top

Fragile

Protect Against Moisture

The arrow tips on the sign mark the top of the package. They
must always point upwards; otherwise the content may be
damaged.

Marks packages with fragile or sensitive contents.

Handle the package with care; do not allow the package to fall
and do not allow it to be impacted.

Protect packages against moisture and keep dry.

Summary of Contents for SampleXpress















































































































































































Search results

Summary of Contents for SampleXpress

Reviews:

Bruker SampleXpress, User Manual, Page: 51 / 174

Search results

Summary of Contents for SampleXpress

Reviews: