Bruker SampleXpress User Manual Download Page 36 | Manualshive

Page: 36 / 174

Bruker SampleXpress User Manual Download Page 36

36

Z31900_00_01

Design and Function

Figure 5.2

Overview

5.2

Brief Description

The SampleXpress sample changer allows the automatic measurement of samples in
connection with a spectroscopy magnet. The samples are inserted into the magnet by
the SampleXpress, and are stored in a removable cassette. Thereby it is possible to
remove the cassette for filling/removing samples. The cassette has a capacity of 60
samples. Operation of the unit is controlled by the application software.

The SampleXpress will not automatically move an actor during a running NMR measure-
ment, unless it is desired by the operator, e.g. to move to another position.

1.

Cassette Cover

2.

Sample Conveyor Chain

3.

Spinner with Sample

4.

Operator Access Position

5.

NMR Access Position

6.

Cassette

7.

Sample Pool

«
...
34
35
36
37
38
...
»

Summary of Contents for SampleXpress















































































































































































Reviews:

No comments