Bruker NMR iProbe HR-Liquids, User Manual, Page: 15 / 56

Transport, Packaging and Storage
Z33146_1_001 15 / 56
4 Transport, Packaging and
Storage
Initial installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by Bruker Service or personnel authorized by Bruker.
Damage due to servicing that is not authorized by Bruker is not covered by your warranty.
4.1 Symbols on the Packaging
The following symbols are affixed to the packaging material. Always observe the symbols
during transport and handling.
Fragile Marks packages with fragile or sensitive
contents.
Handle the package with care; do not allow the
package to fall and do not allow it to be
impacted.
Table 4.1: Symbols on the Packaging
4.2 Inspection at Delivery
Upon receipt, immediately inspect the delivery for completeness and transport damage.
Figure 4.1: Shock Watch
Therefore, check the Shock watch on the package of the iProbe. In case the sensor has been
activated according to the description on the labels follow the procedure below.
Proceed as follows in the event of externally apparent transport damage:
• Do not accept the delivery, or only accept it subject to reservation.
• Note the extent of the damage on the transport documentation or the shipper's delivery
note.
• Initiate complaint procedures.
Issue a complaint with respect to each defect immediately following detection. Damage
compensation claims can only be asserted within the applicable complaint deadlines.