Assembly of Optical Viewing System
Rev. C
NanoScope Optical Viewing System
5
311.2.3
Mount Split Collar and Delrin Washer
Orient the split collar with its grooved side upward, then slide it over the support pole and
position half way down the pole. Tighten the split collar until the collar is firmly secured.
Slide the delrin washer over the pole and rest atop the split collar.
311.2.4
Install Focus Mount Assembly
Slide the focus mount assembly down the support pole until it rests atop the delrin washer
and split collar. The focus mount assembly should be oriented with its mounting ring up.
Tighten the focus mount assembly until firmly secured.
311.2.5
Mount the Optical Assembly
Fit the optical assembly into the focus mount assembly, then rotate the optical assembly
until the fiber optic cable is oriented as shown in Figure 213-3. Insert and tighten a
thumbscrew through the mounting ring to secure the optical assembly.