Bruker minispec TC3, User Manual, Page: 19 / 46

Transport, Packaging and Storage
H148851_4_004 19
5 Transport, Packaging and
Storage
WARNING
Lifting Hazard
Lifting without assistance may cause injury.
u
Two people are required to lift the device.
u
Lifting should be done with a person situated on either side of the device.
Inspect external packaging upon receipt for signs of shipping damage. Inspect all items
during unpacking and notify the carrier immediately of any concealed damage. Check for
kinked tubing.
If the system is shipped or removed from storage during cold weather, allow the packaged
equipment to equilibrate to room temperature before opening and exposing to warm, humid
air. It is usually sufficient to provide four to eight hours for this purpose.
CAUTION
Equipment Damage from Condensation
If condensation forms on or inside the unit, allow it to dry thoroughly before connecting it to a
power source and operating it. Failure to do so may cause equipment damage.
Remove the packing checklist from the shipping container, and check off items against it.
Leave accessories in the packing until you are ready to install them.
Note : Keep the factory packaging for use in case the product ever needs to be returned or
shipped to another location.