Bruker minispec TC3, User Manual

Page: 16 / 46

Technical Data
16 H148851_4_004
4.3 Gas Connection
One fitting is provided for nitrogen purge gas. The nitrogen source must be regulated to a
pressure of no more than 35 kPa (5 psi, 0.35 bar). A typical gas flow of 0.5 liter/minute shall
apply.
4.4 Thermal Characteristics
Temperature calibration and validation is performed at the factory.
Figure 4.1: Thermal Characteristics of a 3-Zone 10 mm SFC Version
Zone Default Temperature Temperature Range
3 0° C 0° C to +66° C
2 65° C A5° C to +66° C
1 100° C A5° C to +100° C