Bruker BMS, User Manual

Page: 23 / 63

Phonebook
User Manual Version 002 BRUKER 23 (63)
Figure 2.5. Group Assignment (external groups) Window
The phonebook list box (left side) contains the entries which are currently unas-
signed to a group. These entries can be assigned to one of the groups by first
highlighting the entry in the
Phonebook list box and then clicking on the corre-
sponding buttons. The entry will then be moved from the phonebook list box
to one of the external groups . To return an entry to the phonebook list box, use the
corresponding button.
It is also possible to assign entries by clicking on an entry, holding the left mouse
button down while you drag it to the appropriate group, and dropping it into the
group by releasing the mouse button (drag & drop). You can also change the or-
der of entries inside the
External-1 or External-2 groups using this method.
Comment:
It is possible to define which of the external groups will be included in the alarm
loop, which is especially useful for testing the loop, refer to
"Alarm Calls Setup"
on page 30 .
Before the monitoring system can be started, it is necessary that an activated Ex-
ternal group contains at least four entries. (see "Start Monitoring" on page 28 ).
Group Assignment Internal 2.3.3
To add entries to the Internal Group select Group Assignment Internal from the
Phonebook menu selection. This will result in the display of the Internal Group As-
signment window.