manualshive.com logo in svg

Bruker BMS, User Manual

Share
Download
Bruker BMS User Manual Download Page 14

14 (63)

BRUKER

User Manual Version 002

Introduction

Confirm Alarm

Used to reset the alarm and system.

Options

For the system configuration.

Help

For additional help or program information.

The Data Logbook (Data Log), Event Logbook (Event Log), Present/
limit Value Display (Present Data)

Data Log

With the help of the data logbook display the present value read-
ings will be sorted by date and time and displayed with their sta-
tus in tabular form (normal = black, warning = blue, alarm = red).
On the right side of the logbook window there is a scrollbar,
which is used to scroll through all of the recorded data. The set-
tings for time and data recording intervals can be adjusted using
the menu selection 

Options/Data Log.

Event Log

In the event logbook all important actions and events are record-
ed, sorted by date and time. For example: alarm events, phone
calls and so on.

Present Data

In the present data display the present and limit values of the dif-
ferent supervised channels are displayed. With the help of the
three radio buttons (top/right), it is possible to display the re-
spective limit values for alarm, warning and normal.

Status Bar

At the bottom of the screen, the present status (monitoring on/off), login status
and actions (e.g. reading of data) are displayed.

Figure 1.4. Program Desktop

Menubar

Present Data or
Event Log or
Data Log

Statusbar

Summary of Contents for BMS
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands