Bruker BMPC/2, Technical Manual

Page: 98 / 136

98 Z31823_00_05
Configuration (administrator)
Figure 12.12Tools - Options - Passwords & Codes
User Password
When you are logged in as a normal user you are able to control the BMPC/2. You are
also allowed to change between the different displays and to select between the operat-
ing modes.
Administrator Password
In addition to the user functions, the Administrator can also change the configuration of
the BMPC/2.
Service Password
The service mode is restricted to Bruker Service personnel. The service access pass-
word for your system is shadowed out and cannot be modified.
Alarm Confirm Code
The Alarm Confirm Code is needed during an alarm cycle to control the voice box sys-
tem. Entering this code using a DTMF telephone will stop the alarm cycle.
Request Fax/Poll Code
This code is needed if you want to poll the actual status of the BMPC/2 or if requesting a
status fax, using a DTMF telephone.
Press the
OK
button in the main Options window to confirm the changes when you fini-
shed.
After a software update the codes you have changed are still valid. After a complete soft-
ware reinstallation, the passwords are changed back to the defaults.