Bruker BMPC/2, Technical Manual

Page: 113 / 136

113 Z31823_00_05
Configuration (administrator)
12.3.4.3 Contact List (alarm)
In this window you can make changes to the contact list used for alarms. Press the cor-
responding button in order to add, edit, delete records or to scroll through the list.
Figure 12.26Tools - Options - Contact List (alarm)
Through use of the Voice Call and Fax radio buttons, you can determine whether the
Voice Call or Fax contact list is displayed.
When you highlight a record from the contact list or one of the groups on the bottom you
can add member to or remove members from a notification group using the green arrow
buttons.
A description of the various groups and the notification process is found in the section
"Alarm Sequence" on page 40 .
You can change the sequence within these groups (and therefore the sequence in which
they will contacted) by highlighting the name and using the up and down buttons.
You can also make changes to the groups through the use of Drag & Drop with your
mouse.
If you want to add new individuals to the Contact List or you need to change data for an
individual on the list, use the functions
New
or
Edit .
Enter or edit the data as shown in
Figure 12.27 and press
OK
to accept.