44 (53)
BRUKER BIOSPIN
Operating & Service Manual Version 002
Specifications
General Specifications
7.2
Channel High Resolution 100W Output
7.2.1
Table 7.2.
Channel High Resolution 100W Output Specifications
Frequency Range
650 to 900MHz
Linear Gain
48dB ±0.5dB typical
Gain Flatness
±1dB max.
Minimum Pulsed Output Power
(@ nominal Input +4dBm)
100W min. full range
CW Output Power
(Internal Limitation)
25W max.
Linear Output Power
85W typical @ 1dB compression
Linearity
±1dB to 85W typical
Amplifier Biasing
Class AB operation
Blanking Delay Time
1µs min.
RF Rise Time
< 100ns
RF Fall Time
< 50ns
DC Ringing
±100mV typical (due to blanking signal)
Input Noise Figure
8dB typical
Output Noise Power
(Unblanked)
-117dBm @ 1Hz
Output Noise Power
(Blanked)
Thermal Noise
Input/Output Impedance
50
Ω
Input V.S.W.R. Route OFF
1.5 : 1 max.
Input V.S.W.R. Route ON
1.5 : 1 max.
Output Harmonics
(2fc ; 3fc)
-50dBc ; -70dBc max. @ 100W
Pulse Width
(Internal Limitation)
100ms @ 100W (up to CW @ 25W)
Duty Cycle
(Internal Limitation)
25% @ 100W (up to 100% @ 25W)
Droop & Pulse Flatness
±2% typical @ 100W for 100ms Pulse Width
Amplitude Stability vs. Temperature
±0.1% / °C max.
Summary of Contents for BLAH1000 E
