Bruker BioSpin GRASI-1.0, User Manual

Page: 8 / 42

8 (41) BRUKER BIOSPIN User Manual Version 001
Safety
•
(B) Variant
This field indicates the variant number that identifies the production category of
the product. The default variant is 00.
•
(C) ECL
This field indicates the revision number that identifies the product
configuration. The initial revision is 0.00.
•
(D) Serial Number
This field indicates the serial number of the product.
•
(E) Type
This field contains the designation of the product.
•
(F) Information
This field contains additional information about the product.
Manufacturer’s nameplate 2.2.2
The GRASI can be identified by a manufacturer’s nameplate at the back panel of
the unit that has following information:
Figure 2.2. Manufacturer’s nameplate
•
(A) Voltage
This field indicates the input mains voltage of the product.
•
(B) Frequency
This field indicates the input mains frequency of the product.
•
(C) Phases
This field indicates the number of phases of the mains.
•
(D) Power
This field indicates the absorbed power of the product.
•
(E) Current
This field indicates the absorbed current of the product.
•
(F) Wires
This field indicates number of wires with the ground in the mains cord.
•
(G) Part Number
This field indicates the assembly number that identifies the part number of the
product.
Hz
Made in France
VAC
Wires +
A B C Phase
F D KVA
Gnd
E Amps
P/N : G