Bruker BioSpin GRASI-1.0, User Manual

Page: 25 / 42

User Manual Version 001 BRUKER BIOSPIN 25 (41)
6
Servicing the
GRASI 6
Diagnosis and servicing access to the GRASI unit relies on HTTP, allowing
service access with any web browser.
Accessing the GRASI unit 6.1
The GRASI Gradient and Shim Interface Unit is accessible via the CPU-A board
with its IP address.
The IP address is given during "cf" by using TOPSPIN 2.xx software under
PARAVISION 5 on the workstation.
In case of problems :
•
Check the RJ45 cabling between GRASI, Ethernet switch and workstation.
•
Check the Ethernet switch power.
•
Check if the green LED on the GRASI RJ45 connector lights up.
To access the GRASI unit, type "ha" in TOPSPIN 2.xx and choose the GRASI that
should be accessed or start your favourite web browser and type the given IP
address as URL.
Some of these pages are only status pages to inform the operator, some other
pages allow to modify several parameters of the GRASI unit.
You should get the following start screen.