Bruker BEST Installation Manual Download Page 12 | Manualshive

Page: 12 / 29

background image

12 (29)

Installation Manual Version 004

Mounting the Barcode Reader

Figure 3.4. Securing the Barcode Reader Cable to the Control Unit Cable

Connecting the Power Supply

3.2

Connect the power supply unit to the barcode reader plug (5 mm stereo connec-
tor) and the power supply unit to a free mains outlet.

Connecting the Serial Cable

3.3

To send the reader information to the control unit, connect one end of the 10
meter serial cable to the barcode reader plug and the other end to a free serial
port (e.g. TTY09) on the CCU of the spectrometer.

Spiral Hose

Barcode Reader Cable

Gilson Control Unit Cable

«
...
10
11
12
13
14
...
»

Summary of Contents for BEST






























Reviews:

No comments

Related manuals for BEST

Brand: Onyx Pages: 136

Brand: Syris Pages: 5

Brand: Birch Pages: 82

Brand: Cognex Pages: 17

Brand: Symbol Pages: 208

Brand: G4S Pages: 2

Brand: IFM Electronic Pages: 37

Brand: Sony Pages: 2

Brand: Sony Pages: 1

PRS-950 - Reader Daily Edition&trade

Brand: Sony Pages: 2

Brand: Sony Pages: 8

PRS-650RC - Reader Touch Edition&trade

Brand: Sony Pages: 2

PRS-900 - Reader Daily Edition PRS-900BC - Reader Daily Edition PRS-900

Brand: Sony Pages: 2

Brand: Sony Pages: 14

Brand: Sony Pages: 20

PRS-950 - Reader Daily Edition&trade

Brand: Sony Pages: 20

Brand: Sony Pages: 43

Brand: Sony Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands