Bruker BioSpin Solid State NMR User Manual Download Page 88

Page: 88 / 328

88 (327)

BRUKER BIOSPIN

User Manual Version 002

Basic Setup Procedures

Literature

4.10

Shift referencing:

1. R.K Harris, E.D. Becker, S.M. Cabral de Menezes, R. Goodfellow, and P. Granger,

NMR Nomencla-

ture. Nuclear Spin Properties and conventions for Chemical shifts

, Pure Appl. Chem. Vol. 73, 1795-

1818 (2001)).

2. W.L. Earl, and D.L. VanderHart,

Measurement of

C Chemical Shifts in Solids,

J. Magn. Res. 48, 35-

54 (1982).

3. C.R. Morcombe, and K.W. Zilm, J. Magn. Reson. 162 p479-486 (2003)

4. IUPAC recommendation (Harris et al.):

5. http://sunsite.informatik.rwth-aachen.de/iupac/reports/provisional/abstract01/harris_310801.html

Cross polarization:

1. D. Michel, and F. Engelke,

Cross-Polarization, Relaxation Times and Spin-Diffusion in Rotating Solids,

NMR Basic Principles and Progress 32, 71-125 (1994).

2. G. Metz, X. Wu, and S.O. Smith,

Ramped amplitude Cross Polarization in Magic-Angle-Spinning

NMR

, J. Magn. Reson. A 110, 219-227 (1994).

3. B.H. Meier,

Cross Polarization under fast magic angle spinning: thermodynamical considerations

Chem. Phys. Lett. 188, 201-207 (1992).

4. K. Schmidt-Rohr, and H.W. Spiess, Multidimensional Solid-State NMR and Polymers, Academic Press

(1994).

5. S.Hediger, B.H. Meier, R.R. Ernst,

Adiabatic passage Hartmann-Hahn cross polarization in NMR un-

der magic angle sample spinning

Chem. Phys.Lett 240, 449-456 (1995).

Summary of Contents for Solid State NMR









































































































































































































































































































































Search results

Summary of Contents for Solid State NMR

Reviews:

Brands by name

Popular brands

Bruker BioSpin Solid State NMR, User Manual

Search results

Summary of Contents for Solid State NMR

Reviews:

Brands by name

Popular brands