15
CHANGING MODULE FRONT PANELS
1) Remove the hex wrench from its holder at the top right side of
the module.
2) Loosen the screw in the hole at the bottom of the front panel
(see figure).
3) Remove the front panel, bottom first.
4) Insert the new panel, top first.
5) Tighten the screw.
6) Replace the hex wrench in its holder.
150446
1
5
4
3
2
Summary of Contents for LAN-XI
Page 1: ...LAN XI SETUP GUIDE ...
Page 2: ...2015 Copyright Brüel Kjær All rights reserved ...
Page 4: ...2 ...
