10
l
© Brüel & Kjaer Vibro GmbH
/
2 mm ds822 ATEX /8.12.16/technical specifications subject to change/C105507.001/V02
EN
2 mm displacement sensor system series ds822 ATEX | Delivery, storage, transport
Instruction
3
Delivery, storage, transport
Observe the safety information in chapter "Safety"!
3.1
Delivery
Check the packaging for damage upon delivery and make sure that the contents are complete.
Components included in scope of supply
:
Supplied components
Displacement
sensor
Extension
cable
Driver
Complete
displacemen
t sensor
system
Displacement sensor
X
X
Protection cap
X
X
2 nuts
1
1. not available for ds1003 (reverse mount sensor)
X
X
1 sealing ring
2
2. only available for ds1003, (reverse mount sensor), operating temparature range for o-ring -40 °C to +180 °C, for lower
temperatures down to -55 °C o-ring (silicone) on request
X
X
Extension cable
3
3. not available if the length of the displacement sensor with integrated cable corresponds to the nominal system length
of 5 m or 10 m.
X
X
Driver
Assembly adapter
X
X
X
X
Acceptance test certifi-
cate acc. to DIN EN
10204
X
X
X
X
Measurement protocol
(works calibration)
X
User Manual
X
X
X
X
