FINAL PREPARATION
Model(s): RXP
Remove front vent tube to allow room.
Model(s): GTI Series
Remove the glove box.
Model(s): All Models
smr2007-032-002_a
Loosen bolts [3] securing the retaining block [1] at
the bottom of cable support.
Turn adjustment nut [2] as required.
After adjustment, torque retaining block bolts to
6 N•m (53 lbf•
in
).
CAUTION:
Verify when the handlebar is turned
completely to the left or right side, that there is
no interference with venturi, O.P.A.S. or VTS
ring.
A
O.P.A.S.
TM
System Alignment
Model(s): All
All adjustments have already been performed
at factory. If readjustments are needed,
check O.P.A.S. system alignment procedure in
appropriate
SHOP MANUAL
.
Fuel
Model(s): All
At predelivery, we suggest dealers to fill fuel tank
with recommended fuel type as described in
SPECIFICATIONS TABLE
.
NOTE:
Never add oil in fuel.
CAUTION:
Never use fuel containing more than
10% alcohol (ethanol or methanol).
WARNING
Fuel is flammable and explosive under certain
conditions. Always work in a well ventilated
area.
It might be necessary to remove and install safety
lanyard 2 or 3 times to initially feed fuel system.
NOTE:
This procedure should be explained to
purchaser at delivery.
NOTE:
Verify fuel line connectors prior to
powering-up ECM. This verification must be done
visually as well as manually by physically checking
each connection.
WARNING
Never install safety lanyard prior to checking
fuel line connector tightness.
Fuel System Pressurization
Model(s): All
WARNING
At PDI, or whenever doing any type of repair
on watercraft or if any components of fuel
system are disconnected, a pressure test must
be done before starting engine. Ensure to
verify fuel line ends for damage. Always cut
damaged end before reinstallation.
For fuel system pressure test procedure, refer to
appropriate
SHOP MANUAL
.
Coolant Level
Model(s): All
WARNING
Check coolant level with engine cold. Never
add coolant in cooling system when engine
is hot.
1
F18E0M6
Remove seat or seat extension to expose cooling
system expansion tank [1].
20 / 29
2008-1
Predelivery
