BRP SEA-DOO ADVANCED TEC 2010, User Manual

Page: 40 / 63

MAINTENANCE PROCEDURES
If any play is felt or if wheel does not
turn smoothly, have the wheel bearing
replaced.
Wheel Bearing Seal Inspection
A slight film of grease around the seal
is normal. Have the seal replaced if an
excessive leak or damage is noticed.
Lights
Light Bulb Replacement
Taillights Bulb Replacement
1. Remove the lens retaining screws.
smo2010-004-011_a
TAILLIGHT REMOVED FOR CLARITY
PURPOSE
1. Lens retaining screws
2. Remove lens from housing.
3. Remove burnt light bulb as follows:
3.1 Push the bulb in and turn coun-
terclockwise.
smo2010-004-012_a
TAILLIGHT REMOVED FOR CLARITY
PURPOSE
1. Light bulbs
4. Install a new light bulb as follows:
4.1 Index the bulb base with the
socket.
4.2 Push in, then turn clockwise to
lock it.
5. Install lens then secure it using re-
taining screws.
NOTICE
Do not overtighten retain-
ing screws.
License Plate Bulb Replacement
1. Remove lens, refer to
TAILLIGHTS
BULB REPLACEMENT
.
2. Push both tabs then pull burnt bulb.
smo2010-004-012_b
TAILLIGHT REMOVED FOR CLARITY
PURPOSE
1. License plate bulb
3. Install a new bulb by pushing it in.
38
______________
https://www.boat-manuals.com/