BRP LYNX Radien 2019, Operator'S Manual

Page: 112 / 229

RIDING CONDITIONS AND YOUR
SNOWMOBILE
Altitude
At factory, your snowmobile was calibrated to be used within an alti-
tude range (relative to sea level).
A new snowmobile has a tag attached to the handlebar indicating its
calibration. See
IMPORTANT ON-PRODUCT LABELS .
If for any reason you don't know your snowmobile calibration, con-
tact an authorized Lynx dealer.
If your snowmobile is to be used at an altitude outside the specified
range, have it calibrated accordingly by an authorized Lynx dealer.
NOTICE
An inappropriate altitude calibration would decrease
performance and may cause serious damage to the snowmo-
bile.
Temperature
The engine management of these engines provides the optimum
air/fuel ratio for all temperatures.
Hard Packed Snow
The models covered in this guide are built for deep snow conditions
and should never be used during prolonged time in marginal or hard
packed snow conditions.
NOTICE
Using deep snow models in marginal or hard packed
snow conditions could reduce drastically the lifetime of specific
wear items.
All Models Equipped with Minimum Track Profile
of 44.5mm (1.75 in)
BRP does not recommend to ride a snowmobile equipped with high
lug profile track at high speed in a trail, on hard packed surfaces or
ice for an extended period of time.
In the event that you have to, reduce your speed , then minimize the
distance you ride on those surfaces.
NOTICE
Running those tracks at high speed in a trail, on hard
packed surfaces or ice put more stress on the lugs, which tend to
heat up as a result. To avoid potential degradation or damage to
the track, reduce your speed, then minimize the distance you ride
on those surfaces.
_________________
109