206
GEARCASE
DISASSEMBLY
Propeller Shaft Bearing Housing
Components
Remove propeller shaft components and reverse
gear from bearing housing assembly.
Remove push rod from propeller shaft. Remove
the spring from the clutch dog shifter.
Use a punch to push the pin out of the clutch.
Remove clutch dog shifter, push pin, and return
spring.
Use Puller Bridge, P/N 432127, and Small Puller
Jaws, P/N 432131, to remove oil seals.
Use 2-jaw puller and plate assembly, P/N 432129,
to remove reverse gear bearing.
Use Bearing Removal tool, P/N 5034764, to press
bearing from housing.
1.
Propeller shaft bearing housing
2.
Reverse gear backup shim
3.
Reverse gear
4.
Thrust washer
005875
1.
Push rod
2.
Spring
005876
1.
Pin
005877
1.
Push pin
2.
Return spring
005878
8-9 p1
1.
Propshaft bearing
2.
Reverse gear bearing
001857
2
1
