BRP EVINRUDE E-TEC BE225HGXABA, Manual

Page: 356 / 356

T-358
Trouble Check Chart
Outboard Surges, Runs Rough
Outboard Surges, Runs Rough
Observation Possible Cause Procedure
1200 RPM and above S.A.F.E. Access EMM fault codes
May be erratic or
inconsistent Incorrect, fouled, or worn spark
plugs Replace spark plugs
Water in fuel system Check water separator/fuel filter, sample fuel from
fuel return manifold test port
Contaminated or poor fuel
quality Check and replace fuel supply
Low or erratic fuel pressure Check pressure, refer to Fuel System
Air in fuel system Check for air in fuel supply manifold, refer to Fuel
System (vapor separator venting and fuel supply)
Fuel supply restricted Check primer bulb, anti-siphon valve, and fuel
pick-up, check for fuel system air leaks
Restricted or leaking fuel injec-
tor(s) Check injectors, refer to Fuel System
Faulty wiring, connections,
grounds, or CPS air gap Check all grounds, connections, and wiring.
Check CPS air gap.
Low alternator output (55 V) Check voltage on 55 V circuit, refer to System
Analysis and Electrical and Ignition
EMM program, timing, or oper-
ation
Check EMM program and timing; check injector
coefficients; and monitor injector circuits and igni-
tion primary outputs
Weak or erratic ignition opera-
tion Check ignition, refer to System Analysis and
Electrical and Ignition
Capacitor or 55 V circuit wiring Check capacitor and 55 V circuit (white/red), refer
to System Analysis and Electrical and Ignition
Restricted engine exhaust Check and repair as needed
Propping Change propeller type or size as needed
Audible noise Internal powerhead damage Check and repair as needed
Damaged gearcase Inspect gearcase and lubricate