![BRP E200DHLSEB Service Manual Download Page 62](http://html1.mh-extra.com/html/brp/e200dhlseb/e200dhlseb_service-manual_2820543062.webp)
60
INSTALLATION AND PREDELIVERY
FUEL AND OIL PRIMING
Oil Injection Rate
The Engine Management Module (
EMM
) controls
the oil injection rate based on engine RPM. This
rate can be adjusted for the type of oil being used,
and also for powerhead break-in. Use
Evinrude
Diagnostics
software to access these features.
The Set Oil Type option controls the injection rate
for the oil being and typical operating conditions.
The TC-W3 oil type setting is the standard setting
for all outboards. Set TC-W3 for:
•
Operation with all TC-W3 outboard oils includ-
ing
XD30, XD50, or XD100
.
•
Applications requiring maximum lubrication.
•
Extreme applications (racing or harsh condi-
tions)
The
XD100
setting provides an option to run the
outboard at a reduced oil injection rate. This set-
ting REQUIRES the use of
Evinrude XD100
out-
board lubricant and is not recommended for all
applications.
Use the
XD100
setting for:
•
Conventional use (runabouts, cruisers)
•
Moderate applications
Powerhead oil programming labels are provided
to identify
EMM
oil programming. Install the cor-
rect label to alert user to specific oil requirements.
An
XD100
Outboard Oil Decal, P/N 352369, is
available to label boats equipped with outboards
that have been programmed for the reduced oil
injection ratio.
Install decals in a highly visible location, such as
one of the following:
•
Dashboard/deck of boat, next to key switch
•
Deck of boat, next to the remote oil fill
•
Deck of boat, next to oil tank assembly
•
Oil tank cover
•
Cover of oil tank compartment
•
Attach to oil tank or oil fill cap.
IMPORTANT:
Make sure the engine label and
boat decals match
EMM
programming.
1.
Oil control setting
006805
CAUTION
Running an
Evinrude E-TEC
outboard on
other grades of oil while set to the
XD100
oil ratio will result in increased engine
wear and shortened outboard life.
1
1.
Evinrude/Johnson XD30
outboard lubricant (TC-W3)
YELLOW label
2.
Evinrude/Johnson XD100
outboard lubricant (Premium)
BLUE label (Installed)
004119
XD100
Outboard Oil Decal
004522
1
2
Summary of Contents for E200DHLSEB
