BRP E 250 L HO AG B, Service Manual

Page: 320 / 460

Stern and Swivel
DPS Manifold Service
320
Carefully separate the manifolds.
Remove the tube and o-rings from the bottom of
the DPS manifold. Then remove the filter.
Clean and dry all parts thoroughly.
Assembly
Install a new filter into the manifold. Apply a drop
of
Power Trim/Tilt Fluid , P/N 767969, to the
o-rings of a new tube and o-ring assembly. Install
the tube and o-rings into the manifold.
Top of DPS Manifold 009455
1. Screw
009456
1
1. Tube and o-rings
2. Filter
009457
1. Filter
2. Tube and o-rings
009461
1
2
1
2