BRP Can-Am Outlander 450 DPS 2022, Operator'S Manual, Page: 111 / 220

109
T TY YP PIIC CA AL L
1. Adjustment cam
2. Softer adjustment
3. Firmer adjustment
D Dyyn na am miicc P Po ow we err S Stte ee erriin ng g
((D DP PS S)) A Assssiisstt L Le evve ell
A Ad djju ussttm me en ntt ((M Mo od de ellss w wiitth h
D DP PS S))
The DPS mode cannot be changed if
the
transmission lever is set to
REVERSE.
The tri-mode Dynamic Power Steering
(DPS) offers easy steering assistance
to the rider. The level of assistance
will automatically adapt according to
the vehicle's speed and rider’s de-
mand, in order to provide maximum
steering power at lower speed where
the demand is normally higher. As
speed increases, the assistance is
progressively reduced to keep maxi-
mum steering feel and precision to the
rider.
It is possible to choose between three
modes of assistance: Minimum, Me-
dium and Maximum. Each mode will
continue to automatically adapt to the
vehicle’s speed and rider’s demand,
so it does not require to be changed
when riding. These modes are used to
set the level of assistance to match
each rider's preferences.
The following DPS modes are preset
in the vehicle.
D DP PS S M MO OD DE E
DPS
MAX.
Maximum steering assist
DPS
MED.
Medium steering assist
DPS
MIN.
Minimum steering assist
To change the DPS mode using the
multifunction switch, the engine must
be running. Wake up the electrical
system is not enough to do this
procedure.
To see which DPS mode is activated.
–
Do a short press (1 second) on the
DPS button.
– Repress on the same button to re-
turn to previous screen.
To change the DPS mode.
–
Do a short press (1 second) on the
DPS button to see which DPS
mode is activated.
– Do a long press (2 seconds) on the
DPS button to select another
mode. Repeat until the desired
mode is activated.
N NO OT TE E:: It is also possible to change
the DPS mode by doing a long press
on either the LOWER button of the
cluster or on the TRIP/MENU switch
(depending your model). To do this,
the engine does not need to be run-
ning, but the electrical system must be
awake.
TUNE YOUR RIDE