IMPORTANT NOTICE
IMPORTANT NOTICE
This bulletin must be used in conjunction with check list enclosed in bag with
OPERATOR’S GUIDE
. Make
sure that
PREDELIVERY CHECK LIST
is completed and
signed by customer and dealer.
WARNING
To obtain limited warranty coverage, predelivery procedures must be performed by an authorized
BRP ATV dealer/distributor. Apply all necessary torques as indicated.
NOTE:
The information and components/system descriptions contained in this document are correct at
time of publication. Bombardier Recreational Products Inc. (BRP) however, maintains a policy of continu-
ous improvement of its products without imposing upon itself any obligation to install them on products
previously manufactured.
Due to late changes, there might be some differences between manufactured product and descriptions
and/or specifications in this document. BRP reserves the right at any time to discontinue or change
specifications, designs, features, models or equipment without incurring obligation.
The illustrations in this document show
typical
construction of different assemblies and may not repro-
duce full detail or exact shape of parts. However, they represent parts that have same or similar function.
Content of this bulletin is designed as a guideline only.
All mechanics performing predelivery proce-
dures should have attended current model year service training.
All adjustments have already been performed at factory, it is only necessary to validate them. However, if
readjustment is needed, refer to the appropriate
ATV SHOP MANUAL
for the proper procedure.
Further information or inquiries should be directed to your distributor service representative and/or specific
SHOP MANUAL
sections.
Please complete
PREDELIVERY CHECK LIST
for each vehicle and retain a customer signed copy.
Make sure customer receives
OPERATOR’S GUIDE
,
PREDELIVERY CHECK LIST
signed copy and
SAFETY DVD
.
There is a tag attached to ignition key, only customer must remove it. This label will remind customer to
ask dealer/distributor to perform suspension adjustments according to riding style and vehicle load.
WARNING
Torque wrench tightening specifications must strictly be adhered to. Locking devices (e.g.: lock-
ing tabs, cotter pin, etc.) must be replaced with new ones.
2 / 19
2009-5
PREDELIVERY
