FLUIDS
sbl2009-004-119_a
1. Steering cable
2. Steering cable support
NOTICE
Steering alignment procedure, de-
scribed further in this bulletin, must be per-
formed prior to torquing screws from steering
cable supports.
Storage Cover
International Models
1. Install front storage cover on vehicle front
hinges.
2. Position the gas shock lower attachment on
cavity opening.
NOTICE
To avoid breaking the attachment, do
not force to insert it in cavity.
sbl2009-004-120_a
1. Front hinge
2. Shock absorber lower attachment point
Close cover to lock the bottom of the gas shock.
Compliance Label
For Watercraft Sold in Canada
Install Canadian Coast Guard compliance label as
per local legislation.
For Watercraft Sold in California
Install mandatory CO warning label as per local
legislation.
For Watercraft Sold in Australia
Install Australian boat plate as per local legislation.
Vehicle Decal
1. Install decals on vehicle according to customer
country language and local legislation.
2. Ensure that the new decals are installed at the
same location and over the factory installed de-
cals.
Accessories
1. Install accessories (if any) as per their installa-
tion instructions (included in each kit).
2. Install any other equipment required by law (if
any).
FLUIDS
General Guidelines
All fluids (except fuel) have already been filled at
factory, it is only necessary to validate them.
Fuel
WARNING
Never add fuel prior to checking fuel line con-
nector tightness.
WARNING
Fuel is flammable and explosive under cer-
tain conditions. Always work in a well venti-
lated area.
NOTICE
Never add oil in fuel. Never use fuel
containing more than 10% alcohol (ethanol or
methanol).
1. Verify fuel line connectors prior to powering-up
ECM. This verification must be done visually as
well as manually by physically checking each
connection.
2. Add fuel in the fuel reservoir. Refer to
SPECIFI-
CATION TABLE
.
Engine Oil
Recommended Engine Oil
Use
XPS SUMMER GRADE OIL (P/N 293 600 121)
.
12 / 23
2009-3
PREDELIVERY
