BrownDigital FireFly user’s manual
Reminder: Press
to access additional settings that
will be saved as part of the Program.
Keyboard Icons
●
: toggles between uppercase and lowercase
letters
●
: changes the keyboard to display accented
letters
●
: [Backspace] erases a letter/number from the
end
●
: cancel without saving and return Home
Loading a Saved Program
There are two different ways an active Program can be
changed for a Lane:
1. Using the shortcut on the Home Screen
2. Navigating to the Program Screen in Settings
Both options will bring the user to the Programs page where
the user can select from a list of previously saved Programs.
Example Programs Page
Keep in mind that once a Program is loaded, the Dryer will
need time to adjust to any changes in temperature, belt
speed, and airflow. For example, a Program is loaded with a
higher temperature than the one it just replaced. The system
will have to initiate a prewarm to reach that temperature
during which garments will not be sent.
Option 1: Program Selection Shortcut
1. Press on the Program Name currently displayed for
the desired Lane
2. Select the new Program Name from the list
a. Use
and
to navigate to different
pages of saved Programs.
After a Program has been selected, the user will be
redirected back to the Home Screen where the selected
Program will be displayed in the Lane settings. To return to
the Home Screen without selecting a Program, press HOME
in the top left corner of the PROGRAMS Screen.
Option 2: Program Selection from Settings
This option involves a few extra steps, but the user can select
a Program for all the Lanes while in this screen.
1. Press
2. Press
3. Select the desired Program Name from the list
4. Using the on-screen number pad, enter the desired
Lane number to apply the selected Program
5. Press
to load the Program or press
to cancel
6. As necessary, repeat steps 3-5 for the other Lanes
7. Press HOME in the top left corner
Editing a Program
There are three ways the user can edit an existing Program.
Option 1: Home Screen
Edit the settings directly on the Home Screen. Useful when
trying to edit settings that have already been loaded into the
Home Screen.
1. Change the cure settings on the Home Screen to the
desired values.
2. Press SAVE and type in the same name as the
Program you are trying to edit.
Option 2: Program Selection Shortcut
Edit the settings using the Program selection shortcut.
Useful when loading a different Program and want to
check/change a value before loading it.
1. Press on the Program Name of the currently
displayed settings.
2. Locate the desired Program from the list
3. Press and drag the Program name to
4. The settings will be displayed in the same editing
format as the DEFAULT program
5. Press SAVE after editing the desired values.
6
Summary of Contents for Firefly
Page 8: ...BrownDigital FireFly set up guide Appendix A Firefly Machine Wiring Diagrams 6 ...
Page 9: ...BrownDigital FireFly set up guide Figure A 1 1 Lane Firefly Machine Wiring Diagram 7 ...
Page 10: ...BrownDigital FireFly set up guide Figure A 2 2 Lane Firefly Machine Wiring Diagram 8 ...
Page 11: ...BrownDigital FireFly set up guide Figure A 3 3 Lane Firefly Machine Wiring Diagram 9 ...