manualshive.com logo in svg

Brother TD-4550DNWB, User Manual

Share
Download
Brother TD-4550DNWB User Manual Download Page 166

 Home > 

Routine Maintenance

 > Replace the Coin Cell Battery

Replace the Coin Cell Battery

A coin cell battery is used as a backup power supply to maintain the settings for the internal clock. Battery power
is consumed even if the printer is not in use.

•

Remove the battery if you do not intend to use the printer for an extended period of time.

•

We recommend replacing the battery every two years.

•

If the clock is reset while power is supplied to the machine, replace this battery. When replacing the battery,
use a CR2032 Coin Cell battery.

•

Dispose of the battery at an appropriate collection point, not in the general waste stream. Be sure to observe
all applicable federal, state, and local regulations.

IMPORTANT

•

Use only recommended batteries. Other batteries may cause damage to the printer.

•

When storing or discarding a battery, wrap it with cellophane tape to prevent it from short-circuiting.

1

2

1. Cellophane tape
2. Coin cell battery

1. Disconnect the printer from the electrical socket.
2. Turn the printer over.

3. Remove the front cover base using a flathead screwdriver.

162

Summary of Contents for TD-4550DNWB




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands