Printer Setting Tool
31
3
5 Save Printer Print Log
Select whether nor not to save the printer’s
print log. If [
Disable
] is selected, [
Tools
] -
[
Save Print Log in File
] cannot be performed.
Available settings: [
Enable
], [
Disable
]
6 Print Data after Printing
Select whether or not print data is erased
automatically after it is printed.
Available settings: [
Erase All Print Data
],
[
Keep Print Data
]
7 Bar Code*
Select whether or not margins are added
around barcodes.
Available settings: [
With Margins
],
[
No Margins
]
* If this parameter does not appear in the tab,
update the printer driver to the newest version.
The newest version can be downloaded from
the support website.
support.brother.com
Sensor Adjustment Tab
3
If Media Rolls are being used, it is
unnecessary to adjust the sensors.
1 Disable these settings
When this check box is clicked,
appears
in the tab, and the settings can no longer be
specified or changed.
In addition, the settings in a tab where
appears will not be applied to the printer even
if [
Apply
] is clicked. To apply the specified or
changed settings to the printer, be sure to clear
the check box.
2 Media Sensor (Transmissive/Gap)
The following transmissive/gap sensor
parameters can be adjusted.
[
Detection Sensitivity
]
Adjust the precision of the sensor that detects
the gaps (spacing) for die-cut labels.
Available settings: -2–+2
[
Luminescence Adjustment
]
Adjust the amount of light emitted by the
transmissive/gap sensor.
Available settings: -2–+2
3 Media Sensor (Reflective/Bar)
The following reflective/black mark sensor
parameters can be adjusted.
[
Mark Detection Sensitivity
]
Adjust the precision of the sensor that detects
the black marks.
Available settings: -2–+2
[
Luminescence Adjustment
]
Adjust the amount of light emitted by the
reflective/black mark sensor.
Available settings: -2–+2
4 Media Sensor (Peeler) (TD-2125N/2135N/
2125NWB/2135NWB only)
This appears only if TD-2125N/2135N/
2125NWB/2135NWB is selected for [
Printer
].
Specify the settings when the label peeler
(optional) is used.
Adjust the precision of the sensor that detects
whether the label has been peeled.
Available settings: -2–+2
1
2
3
4
Summary of Contents for TD-2020A
Page 68: ...Chapter 8 62 Side view 8 ...
Page 98: ......