Brother SC-2000, Service Manual, Page: 102 / 150

III - 80
2.22 Lubrication during Reassembly
Apply the grease specified below to the parts indicated in the Figs. 3.101 to 3.103
for the reassembly procedures. The amount of the grease to be applied is specified
in the Figs. 3.101 to 3.103.
Specified grease: G501 (silicon grease)
A
Portion: A (Nip roller)
Amount: Apply small
amount of grease to the
portion where the main
chassis makes contact
with the torsion springs
R and L.
Portion: A (Nip roller)
Amount: Apply small amount of
grease to the portion where the
main chassis makes contact with
the label nip spring.
Portion: C (Main chassis)
Amount: Apply small amount of
grease to the dented portions of the
main chassis.
A
B
A
B
B
B
C
C
A
Portion: B (Paper feed roller)
Amount: Apply small amount of
grease to the portion where the
clutch spring makes contact with
the paper feed roller.
Fig. 3.101