Brother RJ-3230B, User Manual

Page: 142 / 231

To specify higher level security settings: When performing certificate verification with the EAP-FAST, PEAP,
EAP-TTLS, or EAP-TLS authentication methods, the certificate cannot be specified from the Printer Setting
Tool. After the printer is configured to connect to the network, specify the certificate by accessing the printer
from a web browser. Installation of the authentication certificate can also be performed with the Printer
Setting Tool by going to the menu bar:
File > Install Certificates .
• WEP Key
Specify a setting only when WEP is selected as the encryption mode.
• Passphrase
Specify a setting only when WPA2-PSK, WPA3-SAE, WPA/WPA2-PSK, or WPA/WPA2-PSK/WPA3-SAE is
selected as the authentication method.
• User ID / Password
Specify these settings only when EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the printer from a web browser, and then
specify the certificate.
• Display the key and password on-screen
If this check box is selected, keys and passwords are displayed in plain (non-encrypted) text.
Wireless Direct Tab (RJ-3250WB)
Wireless Direct Settings
• SSID/Network Key Generation
Select the AUTO or STATIC option.
• SSID (Network Name) / Network Key
Specifies the SSID (25 ASCII characters or fewer) and the Network Key (63 characters or fewer) you want
to use in the Wireless Direct mode.
- The default SSID and Password are as follows:
•
SSID: "DIRECT-*****_RJ-3250WB" where ***** is the last five digits of the printer's serial number.
• Password: 325***** where ***** is the last five digits of the printer's serial number.
- The serial number label is located on the base of the printer.
• Channel
Specifies the channel to use for the Wireless Direct mode.
Bluetooth Tab
Bluetooth Settings
Bluetooth Mode
Selects the control mode when Bluetooth is enabled.
Classic
• Visible to Other Devices
Allows the printer to be “discovered” by other Bluetooth devices.
• Change PIN code
Changes the PIN.
• Display the PIN code on-screen
Displays the PIN on your computer.
• Pairing requires user confirmation on printer
If this check box is selected when using Classic Bluetooth mode, it is necessary to perform additional
printer button operations when pairing with devices running Bluetooth 2.1 or later.
• Auto re-pairing
138