32
SLIDING THE POSITION OF THE PATTERN TO BE
CONNECTED
When using the pattern connecting function, patterns
can be connected by sliding them, instead of only
aligning patterns along reference edges and reference
points. This can be done when you want the pattern to
be equally spaced when embroidered. The vertical and
horizontal shifts can be set up to ±99.9 mm.
a
Second pattern
b
First pattern
a
Second pattern
b
First pattern
c
Vertical distance : + 15.0 mm
d
Horizontal distance : - 40.0 mm
Note
• The arrangement of patterns displayed in the screen
may differ slightly from the actual embroidery.
Use a ruler to measure the vertical and horizontal
shifts before changing the settings.
a
b
a
b
