Brother QL 650TD - P-Touch B/W Direct Thermal Printer, Setup & Operation Manual

Page: 33 / 237

29
STEP
1
STEP
2
STEP
3
Fo
r W
ind
ow
s
Fo
r Ma
c
STEP
4
Befor
e using t
he
printer
Maintenance and
Tro
ubleshooting
U
sing only
this printer
(N
o PC
)
C
onnecting to you
r P
C
Introdu
ction
Adjust the internal clock by one hour by turning Daylight Savings Time ON.
If you turn on the auto cut function your printer will automatically cut each label after it
prints them.
1
Press the Menu button in the Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 8/12" by pressing the up or
down arrow button ( / ) and then press
the OK button.
3
Select "ON" by pressing the up or down
arrow button ( / ) and then press the
OK button.
The setting is saved and the screen returns to the
Time Display mode.
1
Press the Menu button in the Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 9/12" by pressing the up or
down arrow button ( / ) and then press
the OK button.
3
Select "ON" by pressing the up or down
arrow button ( / ) and then press the
OK button.
The setting is saved and the screen returns to the
Time Display mode.
Setting Daylight Saving Time: Menu 8/12
Menu 8/12
DaylightSavings
DaylightSavings
ON
Cut the roll automatically when printing: Menu 9/12
Menu 9/12
Auto Cut
Auto Cut
ON