manualshive.com logo in svg

Brother QL-1100, User Manual, Page: 38 / 133

Share
Download
Brother QL-1100 User Manual Download Page 38

Change the Label Printer Settings 

30

5

Printer Setting Tool for Mac

5

Using the Printer Setting Tool, you can specify the printer’s communication settings and device settings from 
a Mac. Not only can you change the device settings for one printer, but you can also apply the same settings 
to multiple printers.

Note

The Printer Setting Tool is automatically installed when you use the initial installer to install the printer 
driver. For more information, see 

Install Printer Drivers and Software on a Computer

 on page 9.

 

IMPORTANT

The Printer Setting Tool is available only with compatible Brother printers.

 

Before Using the Printer Setting Tool

5

Make sure the AC Power Cord is connected to the printer and to an electrical socket.

Make sure the printer driver has been installed correctly and you can print.

Connect your printer to a computer with a USB cable.

Use the Printer Setting Tool for Mac

5

a

Connect the printer you want to configure to the computer.

b

Click 

Macintosh HD

 > 

Applications

 > 

Brother

 > 

Printer Setting Tool

 > 

Printer Setting Tool.app

.

The 

Printer Setting Tool

 window appears.

c

Check that the printer you want to configure appears next to 

Printer

. If a different printer appears, select 

the printer you want from the pop-up list.

d

Select any of the Settings Tabs, and then specify or change the settings you want.

e

Click 

Apply Settings to the Printer

 to apply the settings to the printer.

f

Click 

Exit

.

IMPORTANT

Use the Printer Setting Tool to configure the printer 

only

 when the printer is idle. The printer may 

malfunction if you try to configure it while it is processing or printing a print job.

 

Summary of Contents for QL-1100






































































































































Reviews:

No comments