Brother QL-1100 User Manual Download Page 108

Page: 108 / 133

100

The software can be upgraded to the latest available version using the P-touch Update Software.

Note

• The actual software and the contents of this manual may differ.
• Do not turn off the power when transferring data or updating firmware.

Update P-touch Editor and P-touch Address Book (Windows

only)

IMPORTANT

Before updating P-touch Editor and P-touch Address Book, install the printer driver.

Start the P-touch Update Software.



For Windows 7:

Double-click the

P-touch Update Software

icon.

Note

The following method can also be used to start P-touch Update Software:
Click

Start

All Programs

Brother P-touch

P-touch Update Software



For Windows 8 / Windows 8.1:

Click

P-touch Update Software

on the

Apps

screen or double-click

P-touch Update Software

the desktop.



For Windows 10:

Click

Start

Brother P-touch

P-touch Update Software

, or double-click

P-touch Update

Software

on the desktop.

How to Update P-touch Software

Summary of Contents for QL-1100






































































































































Search results

Summary of Contents for QL-1100

Reviews:

Brother QL-1100, User Manual, Page: 108 / 133

Search results

Summary of Contents for QL-1100

Reviews: