Brother QL-1100 User Manual Download Page 101

Page: 101 / 133

How to Transfer Templates with P-touch Transfer Express (Windows only)

Transfer the Template to P-touch Transfer Manager

In P-touch Editor, open the template you want to use.

Click

File

Transfer Template

Transfer

The template is transferred to P-touch Transfer Manager.
P-touch Transfer Manager automatically starts up.

Note

•

For Windows 7:

The template can also be transferred to P-touch Transfer Manager by clicking

Start

All Programs

Brother P-touch

P-touch Tools

P-touch Transfer Manager 2.3

to start P-touch Transfer Manager,

and then dragging the .lbx file to the P-touch Transfer Manager window.

•

For Windows 8 / Windows 8.1:

The template can also be transferred to P-touch Transfer Manager by clicking

P-touch Transfer Manager

2.3

on the

Apps

screen to start P-touch Transfer Manager, and then dragging the .lbx file to the P-touch

Transfer Manager window.

• For Windows 10:

The template can also be transferred to P-touch Transfer Manager by clicking

Start

Brother P-touch

P-touch Transfer Manager 2.3

to start P-touch Transfer Manager, and then dragging the .lbx file to the

P-touch Transfer Manager window.

Summary of Contents for QL-1100






































































































































Search results

Summary of Contents for QL-1100

Reviews:

Brother QL-1100, User Manual, Page: 101 / 133

Search results

Summary of Contents for QL-1100

Reviews: