Brother QL-1100 User Manual Download Page 5

Page: 5 / 133

Table of Contents

Parts Description .......................................................................................................................................2

Front ....................................................................................................................................................2
Rear.....................................................................................................................................................3

Connect the Power Cord ...........................................................................................................................4
Load the DK Roll........................................................................................................................................5
Turn Power On/Off.....................................................................................................................................8

Print Using a Computer (P-touch Editor)

Install Printer Drivers and Software on a Computer ..................................................................................9
Connect the Label Printer to a Computer ..................................................................................................9
Print from a Computer .............................................................................................................................10

Available Applications........................................................................................................................10
Create Labels from Your Computer...................................................................................................11
Attach Labels.....................................................................................................................................12

Print Using P-touch Editor Lite (Windows only)

P-touch Editor Lite ...................................................................................................................................13

Print Using a Mobile Device

Install Applications for Use with Mobile Devices......................................................................................16

Available Applications........................................................................................................................16

Print Labels from a Mobile Device ...........................................................................................................17

Use a Mobile Device to Print Templates Created on a Computer.....................................................17
Attach Labels.....................................................................................................................................18

Change the Label Printer Settings

Printer Setting Tool for Windows .............................................................................................................19

Before Using the Printer Setting Tool ................................................................................................19

Use the Printer Setting Tool for Windows................................................................................................20
Device Settings for Windows ...................................................................................................................22

P-touch Template Settings for Windows..................................................................................................27

P-touch Template Settings Dialog Box..............................................................................................28

Printer Setting Tool for Mac .....................................................................................................................30

Before Using the Printer Setting Tool ................................................................................................30

Summary of Contents for QL-1100






































































































































Search results

Summary of Contents for QL-1100

Reviews:

Brother QL-1100, User Manual, Page: 5 / 133

Search results

Summary of Contents for QL-1100

Reviews: