Brother PT-P910BT, User Manual

Page: 65 / 88

Auto Power Off (USB Connection)
Specifies the period of time that passes before the Label Printer turns off automatically when connected to a
USB AC Adapter or a computer.
• The Label Printer automatically enters Auto Power Off mode when the specified time elapses under the
following conditions:
-
The Label Printer does not receive data.
- In idle mode.
• The Label Printer automatically leaves Auto Power Off mode when:
-
Any of the Label Printer buttons are pressed.
- The battery is removed and inserted.
- The Label Printer receives data.
- The USB cable is disconnected and then reconnected.
Auto Power Off(Li-ion)
Specifies the period of time that passes before the Label Printer turns off automatically when the Label Printer
is using battery power.
• The Label Printer automatically enters Auto Power Off mode when the specified time elapses under the
following conditions:
-
The Label Printer does not receive data.
- In idle mode.
• The Label Printer automatically leaves Auto Power Off mode when:
-
Any of the Label Printer buttons are pressed.
- The battery is removed and inserted.
- The Label Printer receives data.
Print Information Report
Selects the information you want to include in the Label Printer Information Report.
Special Tape Feed
If Enable is selected when the Special Tape (No Cut) option in the printer driver is selected, the Label Printer
feeds tape for manual cutting.
Auto re-pairing
Control Auto re-pairing of iPhone/iPad Bluetooth devices.
Label Settings Tab
Length Adjustment
Adjusts the length of the printed label.
Full Cut Margin Adjustment
Adjusts the margin of the printed label when cutting the tape at full length.
Half Cut Margin Adjustment
Adjusts the margin of the printed label when cutting the tape at half length.
Related Information
• Change Printer Settings Using the Printer Setting Tool (Mac)
62